高柔性机器人电缆的多维协同设计与疲劳失效机理

    Multi-Dimensional Collaborative Design and Fatigue Failure Mechanism of High-Flexibility Robot Cables

    • 摘要: 针对工业机器人电缆在极小弯曲半径与高频动态负载工况下寿命不足的问题,提出一种“材料-结构-环境”多维协同的设计方法。通过真空水平连铸技术制备Cu-Cr-Zr高导电、耐疲劳铜合金单线,采用相邻层反向绞合结构,结合热塑性聚氨酯绝缘层、镀银芳纶丝屏蔽层、纳米SiO2改性聚氯乙烯护套层,构建多层协同增强体系。根据ASTM D4565: 2015进行弯折试验,在弯曲半径为7D(D为电缆外径)、挂重为300 g、弯曲频率为1 Hz的条件下,以导体电阻上升30%为失效判据,所设计电缆的耐弯折寿命达800万次,较传统设计提升约457.5%。扫描电镜与导体电阻实时监测分析表明,疲劳失效始于单线晶界微裂纹扩展,当单线断裂数量占比大于15%时,导体电阻发生阶跃式突变。基于断裂力学建立的寿命预测模型,其预测误差小于15%。该设计在管道检测机器人与焊接机器人中分别实现650万次以上与800万次以上的工作寿命验证,为高可靠性机器人电缆的研发提供了理论依据与技术参考。

       

      Abstract: To address the issue of insufficient service life in industrial robot cables under conditions of extremely small bending radii (7D, where D was the cable’s outer diameter) and high-frequency dynamic loads, a multi-dimensional collaborative design approach incorporating material-structure-environment factors was proposed. A single-strand wire made of a highly conductive, fatigue-resistant Cu-Cr-Zr copper alloy was produced via vacuum horizontal continuous casting. A stranding structure with adjacent layers twisted in opposite directions was employed, combined with a thermoplastic polyurethane insulation layer, a silver-plated aramid fibre shielding layer and a nano-SiO2 modified polyvinyl chloride sheath, to construct a multi-layer synergistic reinforcement system. Bending tests were conducted in accordance with ASTM D4565: 2015. Results indicated that, under a bending radius of 7D, a suspended load of 300 g, a frequency of 1 Hz, with a 30% increase in conductor resistance as the failure criterion, the designed cable achieved a flex life of 8 million cycles, approximately 457.5% higher than that of the conventional design. Analysis using scanning electron microscopy and real-time conductor resistance monitoring indicated that fatigue failure began with the propagation of microcracks at single-wire grain boundaries; when the proportion of fractured single wires exceeded 15%, conductor resistance underwent a step-like change. The service life prediction model, established on the basis of fracture mechanics, had a prediction error of less than 15%. The design was validated to achieve operational lifespans of over 6.5 million cycles in pipeline inspection robots and over 8 million cycles in welding robots, respectively, providing a theoretical basis and technical reference for the research and development of highly reliable robotic cables.

       

    • ©上海电缆研究所有限公司《电线电缆》编辑部版权所有,未经授权不得转载、改编。

    /

    返回文章
    返回